Roller coasters are an imporant ride to have in 168澳洲幸运5开奖网:Park Beyond. With a selection of flat rides and roller coasters, you can keep your guests happy, which may even cause them to spend more money. At first, roller coaster building can be a bit difficult, especially if you don't have a specific vision in mind.

Related: 168澳洲幸运5开奖网:Park Beyond: Achievement/Trophy Guide

In this guide, we are going to take a look at how to build a roller coaster. The 168澳洲幸运5开奖网:first mission of the campaign will take you through some basics, but this will provide a more com♉prehensive guide to help you make an impressive coaster.

Placing Your Coaster Platform

The first step to making a roller coaster is to place a platform. This can be found on the left-hand side of your screen. By clicking on the icon shaped like a little roller coaster slope, you can see the three types of roller coasters that exist.

Hover over the coaster type that you want, and place the platform on the ground. This will not create any track, just the 🐽platform that guests will use to enter and exit.

From the roller coaster type menu, you can find the 'Prefab' menu. This will pull up prebuilt roller coasters that you can place in your park.

Placing Tracks

Immediately after placing the platform, your test car will begin to move on the track. As you don't actually have any track placed, it will probably fall off the platform. To prevent this from getting in the way of your work, click on the pause button, found at the lower right-hand corner of the screen. This pauses the test ride.

Now, it's time to start placing some track! There are four types of tracks available, which you can check out below.

Adjusting The Track

While placing your track, you can adjust its positioning so it's not a straight, flat surface.

Track Placement Settings

There are also several track placement settings that help you place a piece of track. Grid Width and Height essentially create a grid that your track can snap to.

Overall, the placement settings are quite simple, just giving you some more options while building, such as creating a tunnel or removing supports.

Placement settings remain the﷽ same while placing Modules and Coaster Elements as well.

Placing Modules

Modules are an important piece of your roller coaster. These are the fun little bits that make the roller coaster even more appealing. Below, you can see every Module, as well as w๊hat it does.

Module	Description
Cannon	Shoots the train over a short distance.
Ramp	If a train is moving quickly,♏ it can take a🎶 ramp to fly momentarily, landing on a paired ramp.
Two Way Fork	Creates a fork in the track. You can𓃲 choose which side is used first.
Three Way Fork	Creates a fork wi🤡th three possibl💃e output locations. You can choose which side is used first as well.
Spring	Trains that hit a spring will bounce backward.
Launcher	Trains on a flat surface will sit on a launcಞher for a few seconds before blasting off at a high speed.
Filter	This is like a Two Way Fork, but it filters which tr𓃲ain cars ca🍨n use the branch.
Intersection	This is a spot where a ♛track intersects with another piece of track.
Elevator	This lifts train cars up to a higher section.
Car Lift	This will move aꦺ single train car up to ano𒆙ther track.
Station	With another station, your coaster will tur✤n into a transportation ride.
Off-Rail	Train cars that are Off-Rail will appear to be movꦕing on the ground/water with no track below.

read more

Some Modules have speed requirements. For example, if your train hits a Spring too hard, it will crash. When placing Modules, be sure to test each portion, ensuring th♊at the potential guests will remaꦛin safe.

If your coaster is too nausea-inducing, try to hire a few more Paramedics. This is a staff ꦉmember that can tend to ☂the needs of your guests and treat nausea.

Placing Coaster Elements

The last portion of track that you can place is prebuilt Coaster Elements. These are sections such as 'Vertical Loop Left' or 'Hammerhead Right'. Each element will have a little image showing what the track looks like.

Overall, this can be used to speed up your coaster building. After placing, you can go back and adjust the nodes to your liking.

Adjusting Existing Track

After placing a track, you will be able to go back and edit it. While looking at your track, you will see little diamond-shaped nodes. By holding down on a node, you can adjust it similarly to how you did when first placing the track. These nodes can also be straightened out to align with the surrounding track.

Yღou can also adjust the station s♈ize, which adds/removes cars.

Choosing A Hook

Hooks are like little taglines that appeal to your guests. Hooks can be chosen before or after you build your coaster. From the build menu, you can find the hooks at the bottom right-hand corner. By clicking on this, you will see all hooks tha𓄧t caღn be chosen.

Before Impossifying your coaster, you will be able to choose two hooks. Each hook haꦕs its own stats. For example, the Unchained Hook🐟 will provide the following stats.

• +1 Fun
• +2 Profitability
• +1 Amazement

Additionally, the hook appeals to teens, but families will still like the ride. Adults, on the other hand, don't really like this hook.

You can choose a hook after your coaster is built, finding one that fits. Alternatively, you can choose the hooks first, and then build your coaster with the requirements in mind.

Below, you can see ever𝐆y hook and🔯 what it requires.

Hook	Description
Bumpy Ride	Have sideways g-forces of 6 or higher 🌄tw♌o separate times.
What's Up?	Have the train do 4 inversions (go🐲ing upside down)
Unchained	Don't use Chain Lift track.
Trident	Use at least two Three Way Forks.
Transportation Ride	Use more than one station.
Acrophobia	Have the train remain under 10m off the ground.
Cannoneer	Use one cannon.
Dual Lane	Use at least two Two Way Forks.
Heavy Lifting	Have the train use two elevators.
Divide and Conquer	Have the train cars be split for at last 10% of the r෴ide.
Comet	Go at least 120 km/h.
Junior Coaster	Do not go above 80 km/h, as well as having no ꦫinversions.
Give Me A Break	Have at least 20m of breaks.
Busy Intersection	Use at least two Intersections.
Back It Up!	Use a Spring.
Backwards Ride	Have the train go backward at ꦡ꧟least 80% of the time.
Are We There Yet?	Have the ride last at least 3 minutes.
Another Ride	Go through the same station at least two times.
Lift Hill	Go through 40m of Chain Lift.
To The Moon!	Reach a height of at least 50m.
Straightforward	Don't go backward.
Thrill Ride	Have an average speed of over 40 km/h.
The Great Filter	🎶Have the train go through one filter at least two times.
The Big Splash	Use Off-Rail tracks in the wateꩵr for at least 10m.
Stunt Ride	Use at least 1 ramp.
Sightseeing Tour	Travel at least 1 km.
Lift Your Spirits	Use a Car Lift.
Scenic Ride	Stay under 40 km/h, and don't have any inversions.
Safe Arrival	Arrive at the station going less than 20 km/h.
Ready to Launch!	Use a Launcher.
Out of Order	Have th🎶e train cars arrive at the station in a different order from when they left.
Look Ma, No Rails!	Use Off-Rail tracks on land for at least 200m.

read more

Tips For Building A Roller Coaster

Focusing On A Hook

One of the best pieces of advice we can offer is to have a vision in mind. Rather than starting your coaster without a hook, we highly suggest choosing them before building. The hooks will display at the bottom of your screen, acting as a checklist of what you need.

After doing a test of your coaster, you will see if you qualify for the hook. For example, if you are pursuing the Sightseeing Tour hook, you can test your coaster to see how long the track is. If you successfully went at least 𝐆one kilometer, then a green checkmark🐈 will appear next to the hook.

Building Around Your Park

In addition to sticking to your hooks, try to build your coaster around the park! Rather than sticking to one area, you can have the coaster loop around existing structures. If you are using the Park Beyond-themed en🃏trance, you can even have the coaster pass through the loop on the structure!

From the Modular Structure menu, you can build your own custom coaster scenery, such as houses that can be passed through or little scenes.

Impossify Your Coaster

When you have enough Impossification charges for your coaster, we suggest spending it. 168澳洲幸运5开奖网:When your coaster becomes Impossified, you will gain an additional hook that can greatly boost the stats of the ride.

Revising Your Coaster

Overall, don't be afraid to go back and edit your coaster! If it's not as grand as you want, simply pause the game, edit the coaster, and make it better. If you are struggling with a coaster style, we suggest looking at existing coasters. By doing a quick search online, you can see what roller coaꦏsters ty🦹pically look like.

Next: 168澳洲幸运5开奖网:Park Beyond: How To ꦡImpoꦗssify Flat Rides